Axis Stripes allow you to highlight a repeating range on the axis. The following options are available:
Depending on the axis type the following options are available:
- Cartesian Y Axes
- Show At Back - defines whether interlaced stripes must appear on the back chart wall.
- Show At Side - defines whether interlaced stripes must appear on the side chart wall. This setting is ignored when the chart is operating in 2D mode.
- Cartesian X Axis
- Show At Back - defines whether interlaced stripes must appear on the back chart wall.
- Show At Floor - defines whether interlaced stripes must appear on the floor chart wall. This setting is ignored when the chart is operating in 2D mode.
- Cartesian Depth Axis
- Show At Side - defines whether interlaced stripes must appear on the side chart wall. This setting is ignored when the chart is operating in 2D mode.
- Show At Floor - defines whether interlaced stripes must appear on the floor chart wall. This setting is ignored when the chart is operating in 2D mode.
- Polar / Radar Axis
- Show - defines whether interlaced stripes must appear on the chart polar / radar plot area.
Axis stripes can operate in three modes - Interlaced, Numeric and DateTime. You select the mode of the stripes from the Mode combo box. The following table describes the possible options:
| Axis Stripes Mode |
Description |
| Interlaced |
Stripes will be synchronized with the values of the major ticks of the axis. You can control the appearance pattern through the "Length" and "Interval" settings. |
| Numeric |
Stripes will appeared at a custom specified numeric step. You control the step at which stripes appear from the "Numeric Step" up down. |
| DateTime |
Stripes will appear at a custom specified date/time step. You control the step at which stripes appear from the "Date Time Step" editor allowing you select a date time unit and unit number. |
Length - controls how many steps the stripes will cover.
Interval - controls how many steps the stripes will miss.
